ETICS Impact Anchor H1 eco 3856

For statically-relevant anchoring of insulation boards in the Brillux ETIC systems. Can also be used for additional constructive mounting of ETICS hard foam insulation boards in the adhesion method in the EPS Prime and EPS Qju systems.

approved impact washer anchor with galvanized nails and plastic-molded nail head
with a stable (break-proof) steel nail
low anchoring depth with minimal drilling hole depth
more efficient use of anchors
faster mounting due to preassembled anchor sleeve and nail
reduced thermal bridge impact due to plastic sheath at the top end of the nail
length specification on the anchor washer enables visual check of the anchor length following successful mounting
anchor lengths: 95, 115, 135, 155, 175, 195, 215, 235, 255, 275 and 295 mm

Ordering Information

3856 / 95 mm / PU 100
3856 / 115 mm / PU 100
3856 / 135 mm / PU 100
3856 / 155 mm / PU 100
3856 / 175 mm / PU 100
3856 / 195 mm / PU 100
3856 / 215 mm / PU 100
3856 / 235 mm / PU 100
3856 / 255 mm / PU 100
3856 / 275 mm / PU 100
3856 / 295 mm / PU 100

Data Sheet PDF, Per E-Mail empfehlen

Merkmale & Bestellung

approved impact washer anchor with galvanized nails and plastic-molded nail head
with a stable (break-proof) steel nail
low anchoring depth with minimal drilling hole depth
more efficient use of anchors
faster mounting due to preassembled anchor sleeve and nail
reduced thermal bridge impact due to plastic sheath at the top end of the nail
length specification on the anchor washer enables visual check of the anchor length following successful mounting
anchor lengths: 95, 115, 135, 155, 175, 195, 215, 235, 255, 275 and 295 mm

Ordering Information

3856 / 95 mm / PU 100
3856 / 115 mm / PU 100
3856 / 135 mm / PU 100
3856 / 155 mm / PU 100
3856 / 175 mm / PU 100
3856 / 195 mm / PU 100
3856 / 215 mm / PU 100
3856 / 235 mm / PU 100
3856 / 255 mm / PU 100
3856 / 275 mm / PU 100
3856 / 295 mm / PU 100

Datenblätter

Data Sheet PDF, Per E-Mail empfehlen